Installation materials and tools

Connecting material

UNI wall clip

This UNIversal wall clip is used when installing partition walls. It can also be modified for the installation of Ekopanely boards between one another, as well as for anchoring them to an existing wall. The clamp is therefore supplied flat and can be bent into shape depending on what it is to be used for. It can be found in our price list.

EP 4×50 mm woodscrew

Ordinary woodscrews available in our product range. This type of screw is used only to connect Ekopanely boards using UNI wall clips.

EP 5×100 mm woodscrew

Ordinary woodscrews available in our range. This is used for installing Ekopanely boards onto a structure (as ceilings, cladding, etc.).

EP-P1 washer

Used in combination with the 5×100 mm woodscrew for installing Ekopanely boards onto a wooden structure (as ceilings, cladding, etc.).

Other construction accessories

Installation foam (low expansion insulation foam)

LOW expansion foam used for filling any seams between individual Ekopanely boards. It can be found in our price list.

SP100 sealing tape (100mm)

All cut edges need to be carefully taped off.  We strongly advise you to use this tape. It is in our price list.

Recycled plastic block

This is a profile designed for creating the outer cladding base of the exterior walls which prevents water to rise into Ekopanels. It can be found in our product range.

Installation tools and aids

Cordless Drill

Aku drills are useful when installing Ekopanely boards. This practical tool has almost everyone at home.

Hand circular saw (Mafell circular saw)

An important aid for cutting Ekopanely boards; can be used for transverse and longitudinal sections. We recommend using a specially modified blade, which can be find in our price list (we use high-quality professional saw blades).

Jig saw

For the final cuts we use standard jig saws. WE RECOMMEND getting a tried-and-tested type which can be found in our product range.

Ekopanely board carrying hook

If you plan to carry an Ekopanely board for any distance, this aid will certainly make the job easier, making the panels far easier to carry. You can find it in our price list.

Ekopanely board ceiling jack

A simple yet very effective device to make it easier to fit level ceilings. This lifting jack enables you to comfortably and effortlessly install ceilings made from Ekopanely boards onto pre-prepared grids. It can be found in our product range.